Corner Protectors

Corner protectors (sometimes also called strap protectors, vee boards, or tie down strap protectors) are an inexpensive way to protect not only your cargo, but also protect your straps or chains, and any tarps or covers that you use in tie down applications.

Designed to provide a layer between the edge of cargo and the strap or chain that secures it to the vehicle, flatbed corner protectors distribute the pressure of the straps or chains across a wider area, so no concentrated area bears the pressure of securing the entire load. This even distribution works to safeguard the cargo while also dramatically extending the working life of the strap or chain.

CP01 Plastic Corner Protectors, Corner Protectors

Plastic Corner Protector (Edge Protector) for webbing up to 100mm.

The gap in the corner protector allows it to be placed onto the strap while in use.

Helps protect the webbing from sharp edges.

Suitable for webbing up to 100mm in width.

Weight - 55 grams

Edge protectors do not just prevent damage to the straps, they also prevent the cargo from being indented with the marks of the straps.

CP03 Plastic Corner Protectors, Corner Protectors

This Heavy Duty Plastic Corner Protector was designed for applications where the edge of the product must be protected from damage such as plaster board and paper.

Edge protectors do not just prevent damage to the straps, they also prevent the cargo from being indented with the marks of the straps.

CP07 Plastic Corner Protectors, Corner Protectors

This Heavy Duty Plastic Corner Protector was designed for applications where the edge of the product must be protected from damage such as plaster board and paper.

Edge protectors do not just prevent damage to the straps, they also prevent the cargo from being indented with the marks of the straps.

CP04 - 800mm Plastic Corner Protector, Corner Protectors

800mm Plastic Corner Protector (Edge Protector) for Load Restraint straps.

Helps protect the webbing from sharp edges.

Suitable for all webbing sizes.

Edge protectors do not just prevent damage to the straps, they also prevent the cargo from being indented with the marks of the straps.

CP05 -1015mm Plastic Corner Protector, Corner Protectors

1015mm Plastic Corner Protector (Edge Protector) for Load Restraint straps.

Helps protect the webbing from sharp edges.

Suitable for all webbing sizes.

Edge protectors do not just prevent damage to the straps, they also prevent the cargo from being indented with the marks of the straps.

CP06/H - Corner Protector Attachment, Corner Protectors

This Head is used in conjunction with theCP06/P to place our CP03 edge protectors onto vehicles from the ground without the need to clamber onto vehicles, working platforms or ladders. It therefore removes the risk of falling from heights and reduces the risk of slips or trips. Loading time is also significantly reduced.


The benefits of the Applicator

  • Used standing on the ground, there is no need for working platforms or ladders and the tools is a fraction of the cost.
  • Removes any risk of falling from height and significantly reduces the risk of potential slips or trips.
  • Decreases loading time by half, up to twice as many loads can be sent out, increasing productivity and profit.
  • Compliant with HSE regulations and VOSA enforcement.
  • It saves lives and significantly reduces risk of injury to the work force and the general public.
  • Significantly reduces liability of personal and public injury, reducing insurance premiums, vehicle and product damage.

Size and weight

  • 1.2m closed extending to 2.4m (plus the height of the operative)
  • Longer extendable poles available – 1.8m – 3.6m
  • Weight 0.8 kg

Connectors and expansion

  • Edge Protectors
  • Trident Multi
  • Safety Knife Holder

Storage

  • Can be stored safely in the drivers cab
  • Safety bracket clips available
CP06/P - Corner Protector Attachment Pole, Corner Protectors

This Pole is used in conjunction with a CP06/H to place CP03 edge protectors onto loaded pallets without the need to climb onto truck or trailer bodies. The Pole is made from high quality fibre glass tubing incorporating a further aluminium extension piece.

The Pole allows most loaders to place edge protectors to a height up to 4.2m from ground level (The pole itself will extend to 2.4m).

Each pole comes with a removable and universally threaded adaptor designed to screw into the CP06/H and other equipment.